Quick answer: In India, a high speed door typically costs between ₹85,000 and ₹3,00,000+ per door, excluding GST. A small internal PVC rapid roll door sits at the lower end. A standard 3 m × 3 m industrial PVC high speed door usually costs around ₹1.2–1.8 lakh. Self-repairing, wind-resistant external, cold storage and spiral (hard-shell) doors cost more. Size, motor and control system, safety devices and environment decide the final price.
This guide gives you realistic 2026 price ranges for each type, explains what drives the cost, and shows how to compare quotations so you pay for the right door, not just the cheapest one.
The table below shows indicative market ranges for a typical industrial opening (around 3 m × 3 m), based on Indian supplier listings and published 2026 price bands. Use it for budgeting, then get a site-specific quote.
| Door type | Typical use | Indicative price per door (₹, ex-GST) |
|---|---|---|
| Internal light-duty PVC rapid roll door | Small internal openings, low traffic | 85,000 – 1,30,000 |
| Standard industrial PVC high speed door | Production areas, warehouses, internal partitions | 1,20,000 – 1,80,000 |
| Self-repairing (zipper) high speed door | Busy forklift routes where doors get hit often | 1,50,000 – 2,50,000 |
| Clean room high speed door | Pharma, electronics, food processing | 1,30,000 – 2,20,000 |
| External wind-resistant high speed door | Loading bays and external openings | 1,60,000 – 2,30,000 |
| Cold storage / freezer high speed door | Chillers, freezers, cold chain warehouses | 2,50,000 and above |
| Spiral (hard-shell aluminium) high speed door | High-security, high-wind external openings | 2,00,000 – 3,00,000+ |
Need an exact price? Send your opening size, location and usage to Rudhar Group for a free quotation and site survey.
A high speed door (also called a rapid roll door) is an automatic industrial door that opens and closes far faster than a normal rolling shutter. Most fabric high speed doors run at roughly 1 to 3 metres per second, while a conventional rolling shutter moves at about 0.2 to 0.5 metres per second. Because the opening stays open for only a few seconds per pass, the door cuts heat and cooling loss, dust, insects and forklift waiting time.
A typical door has a flexible PVC curtain, side guides, a geared motor with a variable frequency drive (VFD) for smooth acceleration and braking, a control panel, and sensors such as radar or induction loops that open the door automatically. Explore Rudhar's full range of high speed doors.
The most common and cost-effective option. A reinforced PVC curtain rolls up quickly on a drum. It is ideal for internal openings between production, packing and storage areas. Clear vision panels improve safety for forklift drivers.
If a forklift hits the curtain, it pops out of the side guides instead of tearing. On the next cycle, the door automatically re-threads itself into the guides. This saves repair cost and downtime, which is why it is popular on busy routes. Learn more about the self-repairing high speed door and our complete self-repairing door guide.
These doors use insulated curtains, special seals and often heating elements in the guides to stop ice formation. They protect temperature and reduce compressor load, which is why they cost more. See our cold storage doors.
Designed with smooth, easy-to-clean surfaces, tight sealing and interlock options for controlled environments in pharma, electronics and food plants. See clean room doors.
A spiral door uses rigid aluminium slats that coil into a spiral without touching each other. It offers high security, insulation and wind resistance with very fast operation. It is the premium choice for external openings. See the spiral high speed door.
A rolling shutter costs much less to buy, but it is slow and is not designed for hundreds of cycles a day. A PVC strip curtain is the cheapest barrier, but it does not seal well and blocks visibility. A high speed door costs more upfront, yet it pays back through energy savings, cleaner areas and faster material flow when traffic is high. Read our comparisons: rolling shutter vs high speed door and strip curtain vs high speed door.
A cheaper quote often leaves out the VFD, the light curtain or installation. Compare the full scope, not only the headline price.
High speed doors run thousands of cycles each month, so regular service matters. Typical checks include curtain condition, guide alignment, motor brake, sensors and the control panel. A simple preventive schedule extends life and avoids sudden breakdowns. Follow our high speed door maintenance checklist.
Rudhar Group manufactures, supplies and installs high speed doors across India for factories, warehouses, cold chain, pharma and food plants, along with rolling shutters, dock levelers and complete loading bay equipment. One supplier for doors and loading bays means one site survey, matched sizes and one service contact.
Get a free high speed door quotation →
Most industrial high speed doors in India cost between ₹85,000 and ₹3,00,000+ per door, excluding GST. A standard 3 m × 3 m PVC high speed door usually costs around ₹1.2 to 1.8 lakh.
A self-repairing high speed door typically costs around ₹1.5 to 2.5 lakh for a standard industrial opening, depending on size, motor, safety devices and installation scope.
Most fabric high speed doors open at about 1 to 3 metres per second. Internal doors are usually faster than external wind-resistant doors.
Most quotations show prices before GST. Always confirm whether GST, freight and installation are included before comparing quotes.
Yes. External doors use wind bars, reinforced curtains or spiral aluminium slats to handle wind load. Tell your supplier the location and wind exposure.
With correct selection and regular maintenance, a good high speed door can run for many years and millions of cycles. The curtain and some wear parts may need replacement earlier on very busy doors.
Installing one high speed door usually takes one to two days once the opening is ready. Manufacturing lead time is typically a few weeks depending on type and quantity.
Note: Prices in this article are indicative ranges for India as of November 2026. Actual prices vary with size, specification, quantity and location. Contact Rudhar Group for an exact quotation.
