Quick answer: Industrial and commercial properties in Gurgaon require automated sliding gates engineered for clear openings from 4 m up to 20 m with 100% duty cycle motors capable of continuous multi-axle freight movement. Approximate market rates range from ₹75,000 to ₹1,25,000 for standard 6 m commercial tracked units and ₹1,50,000 to ₹2,50,000+ for heavy 10 m to 15 m cantilever or telescopic systems. Rudhar Group designs, fabricates in Delhi-NCR, and delivers end-to-end installation and site support across Gurgaon.
Updated November 2026 · By Rudhar Group technical team · Plot No. 628, Pipeline Road, Puth Khurd Village, Bawana, Delhi 110039
Gurgaon serves as one of North India's premier industrial and commercial nerve centers, housing extensive automotive, electronics, warehousing, and corporate infrastructure. Facilities located in major manufacturing belts like IMT Manesar, Udyog Vihar, Pace City, Sector 37, and the Sohna logistics zone demand robust entrance automation to manage high-volume heavy commercial vehicle (HCV) movement. From 40-foot shipping containers to multi-axle freight trailers, boundary gates must operate reliably around the clock without mechanical binding or thermal drive trip-outs.
The region's operating climate presents distinct engineering challenges. Gurgaon experiences intense summer ambient temperatures exceeding 45°C, high dust loads from regional dry belts, and monsoon water accumulation across surface drives. In response, modern facilities are shifting away from manual or light-duty residential motors toward industrial-grade automatic sliding gate systems built with structural hollow steel frames, oil-bath gearboxes, and automated safety photocells.
Choosing the correct gate topology depends heavily on boundary wall runback space, ground conditions, and daily vehicle traffic. We engineer and supply three primary variants to match Gurgaon property layouts:
Tracked gates travel along an inverted angle or round floor rail anchored into a reinforced concrete grade beam. These systems support massive weight capacities (up to 4,000+ kg) and are ideal for wide industrial factory gates spanning 6 m to 16+ m where ground surfaces are level and stable. Because the physical weight rests directly on the bottom rail, structural leaf deflection is minimal.
Cantilever gates do not use a ground track across the driveway. Instead, the leaf is suspended above the roadway, supported by heavy-duty internal carriage roller assemblies and counterbalanced by an extended overhang tail. A cantilever sliding gate is well suited for logistics yards in IMT Manesar or Behrampur where heavy axle loads break surface tracks, or where mud, gravel, and unpaved entry aprons constantly clog traditional floor channels.
When compound wall space is constrained by adjacent structures, utility transformers, or narrow property frontages, a telescopic sliding gate offers an efficient solution. Featuring 2 to 3 overlapping leaves that move simultaneously via an internal cable or chain transmission system, telescopic gates reduce the required parking runback clearance by 40% to 50% compared to standard single-leaf configurations.
Every industrial gate leaf and drive system must be specified according to structural loading, motor duty rating, and vehicle transit speed. Review our baseline engineering options:
| Feature / Specification | Tracked Sliding Gate | Cantilever (Trackless) Gate | Telescopic Sliding Gate |
|---|---|---|---|
| Clear Opening Span | 4 m to 20 m (13 ft to 65 ft) | 4 m to 14 m (13 ft to 46 ft) | 6 m to 18 m (20 ft to 59 ft) |
| Standard Height | 2.0 m to 3.0 m | 2.0 m to 3.0 m | 2.0 m to 3.0 m |
| Weight Capacity | Up to 4,000+ kg | 800 kg to 2,000 kg | Up to 2,500 kg total |
| Runback Space Needed | Clearance = Span + 1.0 m | Clearance = Span + 35% Counterweight | Clearance = (Span / Leaves) + 1.0 m |
| Drive Transmission | Steel Rack (Mod 4 / Mod 6) & Pinion | Enclosed Carriage Roller & Rack | Rack & Pinion + Sync Cable/Chain |
| Operating Speed | 10 to 14 m/min (Standard) | 10 to 14 m/min (Up to 18–20 m/min) | 12 to 18 m/min synchronized |
| Motor Power / Ingress | 230V 1-Ph / 415V 3-Ph; IP54–IP65 | 415V 3-Ph (Oil-Bath); IP55–IP65 | 230V / 415V Continuous; IP55 |
B2B procurement teams must account for leaf fabrication, drive motor capacity, civil foundations, and access automation hardware when estimating project budgets. Below are typical approximate market price benchmarks across the Delhi-NCR market:
| Component / System Type | Approximate Market Price Range | Key Technical Influences |
|---|---|---|
| Fabricated Leaf: Mild Steel (MS) | ₹120 – ₹150 / kg (or ₹800 – ₹1,350 / sq ft) | Frame wall thickness (2.5–4.0 mm), infill louvers, pickets |
| Fabricated Leaf: Stainless Steel (SS304/316) | ₹350 / kg (or ₹1,600 – ₹2,400 / sq ft) | High corrosion resistance, clean aesthetics, specialty grades |
| Motor & Drive Automation Kit | ₹30,000 – ₹65,000 per set | Motor rating (800 kg to 2,000 kg), oil-bath gearing, electronic panel |
| Complete Tracked Turnkey Unit (6 m Span) | ₹75,000 – ₹1,25,000 per unit | Includes basic MS leaf, drive gear, tracks, sensors, standard controls |
| Heavy Cantilever / Telescopic (10–15 m) | ₹1,50,000 – ₹2,50,000+ per unit | Reinforced counterweight channel, multi-panel sync, high-capacity drive |
In modern Gurgaon commercial parks and freight terminals, an automatic sliding gate rarely acts in isolation. It forms the perimeter defense line integrated with high-throughput traffic control peripherals. For example, during high-frequency daytime shifts, the main sliding gate often remains open while high-speed boom barriers handle momentary passenger vehicle authorization.
Control integration is supported through dry-contact relays and standard communication protocols. Our automation systems interface with:
Before issuing a tender or purchasing an automated entrance system for your Gurgaon property, verify these operational factors:
Rudhar Group is an ISO-certified industrial entrance automation manufacturer based in Delhi NCR. Manufacturing since 1998, we bring 25+ years of dedicated engineering and production capability to client facilities throughout North India and pan-India.
Whether you are planning an entrance gate installation for an IMT Manesar manufacturing plant, upgrading perimeter security at an Udyog Vihar commercial building, or fitting out a logistics park along Sohna Road, our engineering team handles end-to-end design, custom fabrication, and commissioning.
Contact our technical team today to arrange an on-site physical survey and detailed engineering quotation:
Toll Free: 1800-309-5166
Phone: +91 92181 09433
Factory Address: Plot No. 628, Pipeline Road, Puth Khurd Village, Bawana, Delhi 110039
Most industrial gates range from 6 m to 16+ m clear opening width to accommodate heavy trucks and 40-foot container trailers. Rudhar engineers custom clear openings from 4 m up to 20 m depending on your facility's turning radiuses and roadway approach.
Tracked gates are economical and support extreme weights up to 4,000+ kg, but require clean, level concrete roads. Cantilever trackless gates suspend over the driveway without bottom rails, making them ideal for sites with unpaved entryways, dust accumulation, or heavy axle loads that damage floor rails.
All industrial gate motors feature a mechanical emergency manual release key that disengages the drive pinion from the rack, allowing the leaf to be pushed open manually. Systems can also be integrated with facility diesel generator (DG) circuits or dedicated battery backup UPS systems.
Approximate market rates range from ₹75,000 to ₹1,25,000 for a turnkey 6 m commercial tracked gate unit. Heavy-duty 10 m to 15 m industrial cantilever or telescopic systems with high-tonnage oil-bath motors generally range from ₹1,50,000 to ₹2,50,000+ depending on raw material specifications.
Yes, but you must select a 415V 3-phase oil-bath gear motor rated for a 100% continuous duty cycle. Unlike intermittent-duty residential drives that overheat and trip thermal sensors in ambient heat above 40°C, industrial oil-bath motors dissipate heat continuously.
From our central manufacturing facility in Bawana, Delhi, our technical engineers conduct on-site physical surveys across Gurgaon to verify road levels, runback space, and foundation beams. We then custom fabricate the gate assembly and dispatch installation teams directly to your site.
Related: Industrial Sliding Gate · Contact Rudhar Group