Fire Doors

We Are Available For You

Fire Doors Doors

These specialist doors are tested against the elements and purpose-built to withstand roaring fires for as long as possible. They enable buildings to compartmentalise and delay the spread of fire from one area to another.

Fire doors have a few vital safety features and really can be the difference between life and death. Two of the most important functions fire doors have are:

  • When closed, they form a barrier to stop the spread of fire
  • When opened, they provide a means of escape

Because of their importance in protecting lives, it is imperative that fire doors receive regular inspections – frequency is likely to depend on many factors, including the age and condition of the door. Fire doors should always be fitted correctly by a competent installer, as they’re a carefully engineered fire safety device.

Under the Regulatory Reform (Fire Safety) Order 2005 (FSO), landlords have a responsibility to ensure their properties and tenants are safe. The ‘responsible person’ has a legal responsibility under the FSO and can be criminally prosecuted if they do not fulfill their duties. The responsibility extends to the requirement for a fire risk assessment in all non-domestic buildings, including the common parts of flats or houses with multiple occupation.

Features of fire doors

Here are some of the key features to look out for in terms of both domestic and commercial use:

  • Fire doors are made up of various components. The door itself is usually made from a       solid timber frame, but they can sometimes be covered again in fire-resistant glass. This       glass should be able to withstand exposure to the heat condition in a fire test for at least 60 minutes before it reaches a temperature high enough to soften it.
  • Around the edges of the door will be the intumescent seal, which is designed to expand when temperatures reach beyond 200°C to seal the gaps between the       door and frame.
  • For a private premises, it is advised to install fire doors where the risk is most imminent, for example the kitchen, or rooms which house lots of electrical devices.       If your property is a new build, it should have been subject to regulations ensuring certain doors are fire doors – check this with the developer. As it currently      stands, fire doors are only legally required in Houses in Multiple Occupation
  • For commercial or non-domestic properties, liability lies with whoever is deemed the ‘responsible person’ for that property or the employer. For example, the      owner of the property, or the person in control of the property for trade reasons would be responsible.
  • Thorough risk assessments must be carried out and it is advisable to get professional help with all fire-safety-related regulations. There is more to passive fire       protection and fire safety than just fire doors; escape routes, lighting, warning systems and equipment checks are also required.
  • Many deaths during fires are not from direct contact with the flames, but the consumption of smoke. With this in mind, keep an eye out for a doorset with cold       smoke seals. These should be within the intumescent seal. Exceptions may apply where the leakage of the smoke is essential for detecting a fire early.

Frequently Asked Questions

Common questions answered by our technical team.

Aluminium shutters are 30-40% lighter than galvanised steel for the same shutter area. This reduces motor load and makes manual operation easier. Aluminium is naturally corrosion-resistant without requiring zinc galvanising, ideal for coastal, humid and outdoor environments.

Rudhar Group manufactures aluminium rolling shutters in double-walled and single-walled extruded aluminium profiles. Double-walled profiles offer better rigidity and improved insulation. Single-walled profiles are lighter and more economical for standard commercial applications.

Yes. Aluminium puff insulated rolling shutters are available with PUF (polyurethane foam) injected between double-skin aluminium profiles, providing thermal insulation for temperature-controlled environments and noise reduction.

Aluminium rolling shutters are available up to 12 feet width in standard configurations. For wider openings, a centre guide system or multi-section installation is used. Maximum height is 12-14 feet for standard profile sections.

Yes. All aluminium rolling shutters from Rudhar Group are available with powder coating in any RAL colour. Standard anodised finishes (natural silver, gold, bronze, black) are also available.

Yes. Aluminium rolling shutters are the preferred choice for retail shops and showrooms. Their light weight allows easy manual operation, their appearance is aesthetically suitable for retail, and their corrosion resistance makes them low-maintenance.
Get a Quote